Hardware
The planned boards, what each attaches to, and where it stands
The project builds more than one thing. Every other vintage computing platform has cool new hardware being built. It’s time for the Osborne 1 to get the same treatment. The bus interposer is the centre of it, but three of the boards need no interposer at all — they hang off ports the machine already exposes. If you install any of the external boards, you end up with a cool Osborne 1 that has awesome extras. Add the interposer to an OEM Osborne 1 and you’ve got an O1NEXT. The ultimate is the fully integrated O1NEXT Integrated board in the opinionated case and peripherals — and you can use that board any way you want.
Nothing here has been fabricated… YET Hardware, firmware, and software is in a wild state of flux. Each page says what is actually in hand, not what is planned.
The boards
One name per board, and the name is the folder. This is the same set as the
repository’s board register (hardware/README.md), which is the authority —
tools/check_boards.py fails if this list and that table drift apart.
| Board | Attaches to | Status |
|---|---|---|
floppy-adapter |
Mainboard floppy header | Floppy Adapter’s Rev A schematic captured; ready for routing review |
keyboard-adapter |
P4 keyboard connector | Reference design defined; spec validation pending |
wifi-comm-pac |
MODEM (P1), DE-9 | Concept; pinout and levels documented |
drive-c-repro |
IEEE-488 (P3) + video (P5) | Concept; blocked on the #6 protocol |
interposer-upgrade |
Z80 socket, the main ROM socket UD11, the char-gen socket UA15, ribbon to the pod | One board in four snap-off sections — the interposer, the UI pod and the two ROM socket taps. Rev A engineering-sample schematic generated; Rev B is a pin map with no schematic yet |
next-integrated |
One integrated board; not a 1:1 swap | Concept; no schematic yet (#49) |
The longer forms — O1NEXT Floppy Adapter, O1NEXT USB Keyboard Adapter, O1NEXT WiFi COMM PAC, O1NEXT Drive C Repro, O1NEXT Upgrade, O1NEXT Integrated — are how each board is described; the shortform above is its name, its folder, and its page here.
Not boards
o1next-complete— the machine, and hardware: chassis CAD, print STLs and an assembly BOM fornext-integrated, with its own QMK / Cherry-MX keyboard incidental to it. Not a board, so not a row above — it has its own folder and page.- An LFF (large form factor) 1:1 mainboard — a faithful OCC1/OCC1A replacement, with the Z80 left socketed so the interposer stays the upgrade path. It is possible if a chassis ever needs restoring, and it is not planned, not built and not checked: no folder, no page.
- The MAME machine — the emulated
Osborne 1 (
osborne1nx), used to explore the machine and to test the firmware long before any hardware exists.
Why so many?
Because the machine is unusually open. The Osborne 1 puts every peripheral in a memory-mapped bank and gives the Z80 a slow, simple external bus, so there are four independent places to attach something modern:
- the Z80 socket — the interposer, and anything that wants to see or drive every bus cycle;
- a port on the front — the keyboard connector (P4), the MODEM port (P1), the IEEE-488 card edge (P3) and the video connector (P5). Every connector on an Osborne 1 is on the front of the machine; there is nothing at the back, which is why fitting anything means unclipping the keyboard that docks over that face;
- the character-generator and main ROM socket (UA15 / UD11) — doing flying replacement of ROM code; and
- the mainboard itself — for the reproduction.
Each board below takes one of those, and the point of the standalone three is that they need no interposer, no BIOS change, and nothing cut.
Where the design decisions live
The engineering detail — pinouts, levels, open questions — is in hardware/ in
the repository, one folder per board, and the reasoning is in the issues. These
pages are the readable version: what it is, how it attaches, and what is still
unknown.